HL-1060 Reci C02 100W laser engrave machine This is a Reci 100W Laser Engraver / cuttting machine with 1000mm * 600mm working area size. It can be applicated for leater, acrtlic, plywood, MDF wood, Non-woven, Acrylic，plastic，and spongy-fabric with dirrerent laser power and speed. Feature 1. Adjustable Speed and Power, Smooth and Precise Engraving and Cutting 2. USB Interface 3. Rotary Axis, Engrave any cylindrical object. 4. Water CW-3000 Cooling and Protection System with a chiller. With jam-proof heat exchanger, water flow detection alarm, over temperature alarm. 5. Laser position. 6…. Read More
When using the laser cut machine, you should change the laser power and speed parameters acording to different materials. You can refer to below instuction, but please be noted that below mentioned setting can be adjusted basing on real effect. Cutting materials Laser power Laser speed Cutting thickness(mm) Leather(pu) 65 % 3—4m/min 1mm 65% 2—3m/min 2mm 65% 1—1.5m/min 3mm acrylic 65—70% 3m-4m/min 1mm 65%-70% 1.5mm-2mm 3mm 65%-70% 0.3m/min 10mm 65%-80% 0.1m/min 15mm plywood 65%-70% 0.5-0.8m/min 5mm 65%-70% 0.2-0.3m/min 10mm MDF wood 65%-80% 0.5-1.5m/min 6mm … Read More
Here are some solutions for regular problem when using later cutter machine. Problem Analytical method Solve the problem 1 Machine do not moving when turning on 1.check the power whether you have turned it on 2.Check the pannel paraments if it iscorrect restart the machine again and reset the parameters. 2 No laser beam come out 1.check the laser light whether it is coming out in the middle of the mirror. 2.check the machine line 1.Use the laser light adjuster to adjust the laser beam path. 2. make sure it shots… Read More
130W Laser Engraver Intruduction This is a 130W Laser Engraver / cuttting machine with 1000mm * 595mm working area size. It can be applicated for leater, acrtlic, plywood, MDF wood, Non-woven, and spongy-fabric with dirrerent laser power and speed.
Coreldraw is very famous design software, widely used in different fields around our life. This video shows how to install Coreldraw Suite x6 and plugin for HL-1060 100W laser engraving machine.
To enable laser engraving machine working, USB dongle is critical to enable its Motherboard working correctly. It somehow related to intelligent Property. This video show you how to verify dongle working or not
An often asked question is why my laptop didn’t recognize the laser engraving machine. This video shows you how to verify data link between laptop and laser engraving machine.