DESCRIPTIONS
1; JPT M7 series high power pulsed fiber lasers make use of master oscillator power amplifier (MOPA) configuration, and show excellent laser performance as well as high level of temporal pulse shaping controllability. As compared to the Q-switching technology,the pulse repetition frequency (PRF) and pulse width can be controlled independently in MOPA configuration, through adjusting different combination of the above parameters, the peak power of laser can be well maintained. And enable JPT laser suitable for more material processing which Q-switch limited. The higher output power makes its advantages especially in high speed marking applications.
2; Compact and portable, the desktop model has a small footprint and could be easily transported to the worksite.
3; Flexible, the open design and adjustable Z-Axis allow to work on objects of different shapes and sizes up to 50cm in height.
4; Practical, dual red dot easy focusing device.
5; Galvanometer ZBTK ZB2D10
High speed digital scanning galvanometer system, the high-speed galvanometer,scanning head greatly reduces the delay and improves the marking speed.
6; Original JCZ board card DLC2-M4-2D for 1064nm fiber marking machine.
7; JPT MOPA 100W 2.5D fiber laser marking machine adopts the latest Ezcad3 software and JCZ DLC2 control card, combined with 2D scanning galvanometer and electric lifting, it can support 2.5D deep marking and relief marking functions.
8; 2-year Manufacturer Warranty for products and parts against defects in materials or workmanship, from the original date of receipt for fiber lasers.
SPECIFICATIONS
Laser Source brand
JPT
Laser Power
100W
Marking Area
175X175mm
Wavelength
1064nm
Repetition frequency
1-4000 ( kHz )
Average output power
> 100(W)
Output Power Tuning Range
0~100%
Output Beam Diameter
7±0.5(mm)
M²
＜1.8
Pulse Width Range
2~500(ns)
Max.Single Pulse Energy
1.5 (mJ)
Delivery Cable length
3(m)
Cooling
Air cooling
Software
Ezcad3
Supported Windows
Windows 7,10
Operating Voltage
220V/110V
Total Power
≤800W
Machine Weight
66KGS
Manual & Software
EZCAD3 adopts a 64-bit software kernel. The file processing speed is faster, and the processing file of GB level can be opened.
EZCAD3 supports 2.5D deep marking and relief marking functions.
EZCAD3 can quickly generate arrays of different processing parameters through the parameter assistant to find the best processing parameters.
More mark filling methods: 8 types of EZCAD3 & 5 types of EZCAD2.Sofware and Driver will in U-disk and send to you together.
Reviews
There are no reviews yet.